Show Platform Messaging - Cisco 3020 - Catalyst Blade Switch Command Reference Manual

show platform messaging

show platform messaging
Use the show platform messaging privileged EXEC command to display platform-dependent
application and performance message information.
Syntax Description
application [incoming |
outgoing | summary]
hiperf [class-number]
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.2(25)SEF
Usage Guidelines
You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Cisco Catalyst Blade Switch 3020 for HP Command Reference
C-12
show platform messaging {application [incoming | outgoing | summary] | hiperf
[class-number]} [ | {begin | exclude | include} expression]
Display application message information. The keywords have these
meanings:
•
•
•
Display outgoing high-performance message information. Specify the
class-number option to display information about high-performance
messages for this class number. The range is 0 to 36.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Appendix C Cisco Catalyst Blade Switch 3020 for HP Show Platform Commands
incoming—(Optional) Display only information about incoming
application messaging requests.
outgoing—(Optional) Display only information about incoming
application messaging requests.
summary—(Optional) Display summary information about all
application messaging requests.
OL-8916-01