Show Env - Cisco 3020 - Catalyst Blade Switch Command Reference Manual

Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands

show env

Use the show env user EXEC command to display temperature information for the switch.
Syntax Description all
temperature
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(25)SEF
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
The show env all command does not display the fan status for the switch.
Note
Examples
Switch> show env all
Located in Switch Slot : 1
ISMIC version
Enclosure Name
Rack Name
Rack ID
Temperature Value: 34 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 63 Degree Celsius
Red Threshold
OL-8916-01
show env {all | | temperature} [ | {begin | exclude | include} expression]
Display both fan and temperature environmental status.
Display the switch temperature status.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
: 0.102
: Default Chassis Name
: Default Rack Name
: Default RUID
: 72 Degree Celsius
Cisco Catalyst Blade Switch 3020 for HP Command Reference
show env
2-301