6. Update the server configuration. See "Updating the server configuration" on
Installing the cover
To install the cover, complete the following steps.
1. Place the cover-release latch in the open (up) position.
2. Insert the bottom tabs of the top cover into the matching slots in the server
3. Press down on the cover-release latch to lock the cover in place.
4. Slide the server into the rack.
Connecting the cables
The following illustrations show the locations of the input and output connectors on
the front and rear of the server.
Front view
Rear view
30
IBM System x3655 Type 7985: Installation Guide
page 31 for more information.
Cover-release
latch
chassis.
USB 5 connector
USB 6 connector
Video connector