Table of Contents
Advertisement
To remove the air baffle, complete the following steps:
1. Read the safety information that begins on page v and "Installation guidelines"
2. Turn off the server and peripheral devices and disconnect all power cords and
3. Remove the riser-card assembly (see "Removing the riser-card assembly" on
4. Grasp the tabs on each side of the air baffle, and lift the air baffle out of the
Installing the air baffle
To install the air baffle, complete the following steps:
Attention:
the server. Operating the server with an air baffle removed might damage server
components.
Release tab
Air baffle
on page 9.
external cables (see "Turning off the server" on page 37); then, remove the
cover (see "Removing the cover" on page 11).
page 23).
server.
For proper cooling and airflow, replace the air baffle before you turn on
Riser card assembly
Chapter 2. Installing optional devices
Release tab
13
Advertisement
Table of Contents
