Installing The Air Baffle - IBM 7985 Problem Determination And Service Manual

7. If you are instructed to return the air baffle, follow all packaging instructions, and

Installing the air baffle

To install the replacement air baffle, complete the following steps:
1. Hold the air baffle by the release tabs on each side. Align the front of the air
2. Slide the air baffle down into the server until the bottom edge rests on the
3. Install the riser-card assembly (see "Installing the riser-card assembly" on page
4. Install the cover (see "Installing the cover" on page 110).
5. Slide the server into the rack.
6. Connect the cables and power cords.
7. Turn on all attached devices and the server.
112
IBM System x3655 Type 7985 and 7943: Problem Determination and Service Guide
use any packaging materials for shipping that are supplied to you.
Release tab
Air baffle
baffle with the rear of the fan bracket assembly and the side of the heat sink on
microprocessor number one.
system board.
155).
Riser card assembly
Release tab