Installing the air baffle
To install the air baffle, complete the following steps.
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Put the baffle into place from the top of the server and slide it forward to
3. Press down on the baffle until the pins seat in the system board.
4. Install the cover (see "Installing the cover" on page 42).
5. Slide the server into the rack.
6. Reconnect the power cords and any cables that were removed.
7. Turn on the peripheral devices and the server.
Air baffle
with cable guide
on page 39.
engage the bulkhead.
Attention:
For proper cooling and airflow, replace the air baffle before turning
on the server. Operating the server with the air baffle removed might damage
server components.
Air baffle
Chapter 4. Removing and replacing server components
45