Edit batch parameters
You can customize a set of AMIDiag diagnostic routines to run on your computer. You
can save this customized set of diagnostic tests as a batch file to be run later.
To set or display AMIDiag runtime parameters, select Edit Batch Parameters from the
AMIDiag Options menu. You can set:
•
Type of AMIDiag test to be run
•
Number of times each test is run
•
Test parameters (for example, you can specify the starting and ending hard disk
drive heads and cylinders to be tested)
Edit batch parameters menu
The following box appears when you select Edit Batch Parameters:
Batch parameters
Choose Batch Parameters and press <Enter>. The following appears. Each field is
explained below.
61
Diagnostics