IBM 8872 - eServer xSeries 460 Service Manual page 48

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 3, "Parts listing, Type 8872 and Type 8874," on page 93 to determine which components are
customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Error code Description
01298005 No update data for processor 4.
01298101 Bad update data for processor 1.
01298102 Bad update data for processor 2.
01298103 Bad update data for processor 3.
32
IBM xSeries 460 Type 8872 and xSeries MXE 460 Type 8874: Problem Determination and Service Guide
Action
1. Make sure that all microprocessors have the
same cache size (see "Configuration/Setup Utility
menu choices" on page 135).
2. Update the BIOS code again (see "Updating the
firmware" on page 133).
3. (Trained service technician only) Reseat
microprocessor 4.
4. (Trained service technician only) Replace
microprocessor 4.
1. Make sure that all microprocessors have the
same cache size (see "Configuration/Setup Utility
menu choices" on page 135).
2. Update the BIOS code again (see "Updating the
firmware" on page 133).
3. (Trained service technician only) Reseat
microprocessor 1.
4. (Trained service technician only) Replace
microprocessor 1.
1. Make sure that all microprocessors have the
same cache size (see "Configuration/Setup Utility
menu choices" on page 135).
2. Update the BIOS code again (see "Updating the
firmware" on page 133).
3. (Trained service technician only) Reseat
microprocessor 2.
4. (Trained service technician only) Replace
microprocessor 2.
1. Make sure that all microprocessors have the
same cache size (see "Configuration/Setup Utility
menu choices" on page 135).
2. Update the BIOS code again (see "Updating the
firmware" on page 133).
3. (Trained service technician only) Reseat
microprocessor 3.
4. (Trained service technician only) Replace
microprocessor 3.