Table of Contents
Advertisement
To install the replacement scalability cartridge assembly, complete the following
steps:
1. Insert the scalability cartridge assembly into the chassis rear and pivot the
assembly into place. Make sure the retention latch securely holds the assembly
in place.
2. Install the power-supply structure and the power supplies.
3. Slide the microprocessor tray in the server, close the microprocessor-tray levers,
and close the microprocessor-tray release latch.
4. Install the memory cards.
5. Install the fans.
6. Install the top cover and bezel (see "Top cover and bezel" on page 113).
7. Slide the server into the rack.
8. Connect the cables and power cords (see "Completing the installation" in the
Installation Guide or User's Guide for cabling instructions).
9. Turn on all attached devices and the server.
Chapter 4. Removing and replacing server components
131
Advertisement
Table of Contents
