Xerox 850DP - Phaser Color Solid Ink Printer Administrator's Manual page 60

Media Type - It is based on which selected media type is loaded in the printer.
(To view the current list of sizes for your printer, in the Web PMT,
select Processing Defaults > Media > Media Size and Media
Type drop down menus.) If multiple media types or media sizes are
used for the same job, the first will be listed on the Raw Job
Accounting Data list on the Printer Job Accounting Tab. However,
if you double click on the row in the Media Type column, the
additional data will show.In the Tallied Job Accounting Database,
there will be a separate column for each media type.
Printer Name - 20 characters maximum. The AMT Administrator inputs the
Printer Name on the Add Printers dialog. It can be seen on the
Printers Tab and the Edit Account Associations dialog. However,
the Printer Name in the Raw Job Accounting Database is the
printer name set by the Web PMT or by a PJL command.
Record ID - This is the Raw Job Accounting data record identifier that is
Scan Destination - This identifies the machine and the directory on the AccXES
Scan File Size - Image size (Kbytes) for copy jobs and disk file size for scan-to-
Scanned to Net Count - The total number of scanned images sent to scan-to-
net destinations listed in the job record.
Scan Media Length - Length (mm) of the media being scanned.
Scan Media Width - Width (mm) of the media being scanned.
Scan Time - This is the amount of time (seconds) that it took for the image to be
60 AccXES Account Management Tool Administrator's Guide
generated by the Account Management Tool.
controller where the scanned image was stored. If a job set
was created on the scanner, then double click on this field to
view the data for each of the scanned documents that were
in the job set.
net jobs.
scanned, from the start to the finish of the scan. If a job set
was created on the scanner, then double click on this field to
view the data for each of the scanned documents that were
in the job set.