Xerox 850DP - Phaser Color Solid Ink Printer Administrator's Manual page 42

The controller will attempt to recover any Job Record data from the active job
and any held jobs.
Deleted - The job was deleted or cancelled by a system user. Any
accumulated Job Record data will be logged to the controller's Job Log File.
Track Scanned Image Count - Select this check box to get scanner usage data
from the AccXES printers. The scan data will include information from the
following data fields: Scan Count, Scan Time, Scan Image File Size, Scan Media
Length, Scan Media Width. The default will be ENABLED.
Halt Printer When Job Log is Full (15,000 entries) - When this check box
selected, it sets the AccXES configuration parameter which indicates to the
AccXES controller to stop to all jobs. If the controller's job log file has reached its
maximum entries, or if the controller's continuous storage or disk is full. This will
stop the printer. The job accounting data log must be collected before the printer
will resume processing jobs and logging job accounting data if this checkbox is
selected. The default will be ENABLED.
If this checkbox is selected it causes the AccXES controller to disable account
logging if the log becomes full, but allow the controller to continue to operate.
Accounting data in this case is lost. This configuration is sent to the printers after
you select the Set the Printers Job Accounting Options toolbar button.
CAUTION: New job accounting data will not be saved in the printer
controller's job log file until the AMT Administrator retrieves the data from the full
job log file.
Completion Time - This check box, when selected, enables collection of the
completion time of print jobs from the AccXES printers. The time shall be
dependent upon your settable controller clock. The default will be ENABLED.
Sets Completed - Select this check box to enable the collection of the number of
completed document sets that were sent form the AccXES Document Submit
Tool to the AccXES printers. The default will be ENABLED.
Track Scan to Net Destinations - Select this check box for the AMT to obtain
the network destination for each scan-to-net job and to enable the retrieval of
image data from each of the defined AccXES printer's controller. The values will
contain a colon, quotes, and the number of images, which is currently one for
scan-to-net images. The default will be ENABLED. An example of retrieved scan-
to-net data is: "13.142.199.11:/my-images,1".
Maximum Printer Job Log Length - Enter the maximum number of log entries
to be allowed in the AccXES controller's accounting job log file. The maximum
log size is 15000 entries. The minimum log size is 1 entry. The default log size is
15000 entries. This configuration is sent to the printers after you select the Set
the Printers Job Accounting Options toolbar button.
42 AccXES Account Management Tool Administrator's Guide