Xerox 850DP - Phaser Color Solid Ink Printer Administrator's Manual page 58

NOTE: When a user specifies that a job is to be folded, the job is logged as
"Folded" even if the fold job does not complete the fold process.
IP Address of the Defined Network Printer - Input this address on the Add
Printers dialog. It can be viewed on the Printers Tab.
Job Completion Time - It is the time that the print or scanned job finished.
Job Sets - The number of sets of a job that were produced. For example, a four
Job ID - This is a unique alphanumeric job number which has a maximum of 256
Job Name - This is the alphanumeric name of the job which is assigned by the
Job State - The following printer job completion states will be reported.
Completed-normal - job completed normally
Terminated - job was terminated due to a system error
Deleted - job was deleted by the system user
Job Type - The following are defined printer job types: print, copy, scan, walkup-
report (test print), auto -report (diagnostic error pages or power-on
configuration sheets), other. The data is generated by the scanner
and printer.
58 AccXES Account Management Tool Administrator's Guide
page document with 3 job copies completed means that 3
sets of 4 pages each were produced. A job set of images, or
documents, can be sent to the printer from the Document
Submit Tool, or scanned images can be created into a job
set at the scanner. If multiple media types or media sizes
are used for the same job, the first will be listed on the Raw
Job Accounting Data list on the Printer Job Accounting Tab.
However, if you double click on the row in the Media Type
column, the additional data will show.
characters.
user or the printer. If not defined, it will default to print, scan,
or copy.