Setting Gutter Sizes - Oki ES3640eMFP Management Manual

6
6-151 Modifying the layout manually
For example, in the preceding graphic, if you press the Shift key
and click the Rotate icon on Page 8, Page 6 rotates as well,
because both pages are in the same location on the front side of
the sheet.
4. To rotate all pages in a certain location on the front and back
sides of each duplex sheet, press the Ctrl key and click the Rotate
icon on any page in that location on any sheet.
For example, in the preceding graphic, if you press the Ctrl key
and click the Rotate icon on Page 1, then Pages 2, 3, and 4 rotate
as well, because they are in the same location on the front and
back sides of the sheet.

Setting gutter sizes

DocBuilder Pro defines the locations of gutters for you according
to the layout and sheet size governing the imposition of the job.
In Layout mode, you can specify the size of a gutter by entering a
value in the gutter size field and pressing Enter. For example,
perfect-bound jobs typically require larger gutters than saddle-
stitched jobs, in order to provide room for grinding off the spines
and gluing signatures together when the book is bound.
You can also specify a negative gutter value—for example, to join
together two pages located in adjacent slots, or to offset the
effect of an excess bleed value.
ES3640e MFP EFI Job Management Guide - 151