Oki ES3640eMFP Management Manual page 79

3
3-79 Managing job flow
Choose this
command
Print
Hold
Process and Hold
Print and Hold
Remove Raster Data
The following table describes job management commands in
greater detail and explains how each command affects the raster
data associated with a job:
To do this
Prints the selected job in the
Active Jobs window, Printed Jobs
panel, FreeForm panel, or Archive
panel.
Holds the selected job waiting to
process in the Active Jobs
window, or the selected job in the
Printed Jobs or Archive panel, and
marks the job with either the
spooled/held flag or the
processed/held flag.
Processes the selected job in the
Active Jobs window, Printed Jobs
panel, or Archive panel, and holds
a copy of the job. The copied job
is marked with the processed/
held flag.
Prints the selected job in the
Active Jobs window, Printed Jobs
panel, or Archive panel, and holds
a copy of the job. The copied job
is marked with the processed/
held flag.
Removes the raster data
associated with the selected
processed/held job in the Active
Jobs window, or with the selected
raster job in the Printed Jobs or
Archive panel; leaves the original
PostScript or PCL data in place.
ES3640e MFP EFI Job Management Guide - 79
Raster data is
Temporarily held on the Fiery until
the job completes printing.
Held on the Fiery hard disk drive
indefinitely, if raster data is
included with job.
Held on the Fiery hard disk drive
indefinitely.
Held on the Fiery hard disk drive
indefinitely.
Deleted.