Modifying The Layout Manually; Reordering Pages In Layout Mode - Oki ES3640eMFP Management Manual

6

6-145 Modifying the layout manually

Modifying the layout manually
Whether you apply a predefined layout or specify custom settings,
you can manually modify a job's layout in the following ways:
• Reorder pages.
• Add, duplicate, and delete pages.
• Rotate pages.
• Set gutter sizes.
Note:
changes to the layout: Orientation, Duplex, Rows, Columns, and
Binding. If you specify any of these settings after making manual
changes, you are prompted with a message indicating that the
manual changes will be cancelled.

Reordering pages in Layout mode

When you impose a job, its pages are automatically arranged in a
particular order, according to the layout you select. Each page
number in Layout mode represents the page from the source
document that DocBuilder Pro images in a designated position on
the finished sheet. However, to reorder individual pages manually,
arrange them in the main window. To assign a different page to a
particular location in the layout, use the following procedure.
To reorder pages
1. Verify that Layout mode is selected.
2. Select the location's current page number.
You can also press Tab to move to the next slot in the layout, or
press Shift + Tab to move to the previous slot in the layout.
3. Type the new page value and press Enter.
You can add a blank cover page by typing 0 (zero) for any page
number. Page 0 will be printed as a blank page.
ES3640e MFP EFI Job Management Guide - 145
Specify the following settings before making any manual