Appendix C:troubleshooting; Error Messages - Oki ES3640eMFP Management Manual

C
C-207 Error messages
Appendix C:
Troubleshooting
This appendix describes error messages you might see, and
provides some troubleshooting guidelines should a problem arise
with the Fiery, Command WorkStation LE, or Command
WorkStation. If you are unable to resolve a problem after
referring to this chapter, contact your Oki dealer.

Error messages

Error messages can result from problems with the job, the Fiery,
Command WorkStation, Command WorkStation LE, Fiery Spooler,
or the printer. When an error interferes with printing, you will see
a message in the Activity Monitor of Command WorkStation or
Command WorkStation LE. The status bar that displays the
message indicates the process in which the error occurred.
An error message for the Fiery sometimes remains displayed on
Command WorkStation or Command WorkStation LE even after
you resolve the error. There might be a brief delay while the Fiery
communicates the resolution of the error to the application.
Printing will resume and the Command WorkStation or Command
WorkStation LE window will be updated after a short delay.
For information on resolving printer-related errors, refer to the
ES3640e MFP User's Guide. You can cancel the pending print job
while you attend to a given error condition.
ES3640e MFP EFI Job Management Guide - 207