Oki ES3640eMFP Management Manual page 174

7
7-174 Fiery WebSpooler and Fiery Spooler
If you move the pages on top of existing pages, the pages will be
overwritten.
4. When you are finished editing, click the Thumbnail A tab.
If you have edited the job, you are prompted to save the job.
5. Enter a new name and click OK.
The new file is now located in the RIP area, ready to print. If you
saved the edited file with a new name, the original source file
remains held in the RIP area.
To merge two raster data jobs
1. In Thumbnail A, display the job you want to edit.
The file must be a held raster data job in the RIP area.
2. In Thumbnail B, display another held raster job from the RIP
area.
The Thumbnail B tab opens a second thumbnail view, which
cannot be edited but can be used as a source for pages added to
the document in Thumbnail A.
Note:
document and the target document must be the same. Before
editing or merging raster files with the thumbnail windows, make
sure the source files were RIPped using the print option settings
for the final output.
3. In Thumbnail B, click to select the pages and hold down the
mouse button as you drag the selected pages to the new location
in Thumbnail A.
Shift-click to select multiple, sequential pages; Ctrl-click to select
multiple, non-sequential pages.
To scroll through the pages in Thumbnail A and Thumbnail B, you
can drag the slider bar at the bottom of the screen, click the
empty area to the left or right of the slider bar, or click the arrows.
ES3640e MFP EFI Job Management Guide - 174
To merge documents, the page sizes of the source