Using Commands; Menu Bar - Oki ES3640eMFP Management Manual

2
2-42 Introduction to Command WorkStation and Command WorkSta-
tion LE

Using commands

You can perform a wide variety of functions using Command
WorkStation and Command WorkStation LE commands, which you
access from menus in the menu bar at the top of the Command
WorkStation or Command WorkStation LE window. When one or
more jobs are selected, you can choose job management
commands from context-sensitive menus. In addition, you can
issue some job management commands by clicking their Action
buttons (see

Menu bar

The menu bar contains commands for Command WorkStation or
Command WorkStation LE. When a command is unavailable in the
current context, it appears dimmed in the menu. When a
command appears with a check mark, choosing it again toggles
the command, turning it off.
The menu bar always appears in the Command WorkStation
window, and cannot be dragged to a different location.
Note:
command or menu is available for Command WorkStation only. A
dagger (†) indicates that the command or menu is available for
Command WorkStation LE only.
ES3640e MFP EFI Job Management Guide - 42
page 2-38).
In the following table, an asterisk (*) indicates that the