Oki ES3640eMFP Management Manual page 192

A
A-192 Basics of Imposition
printing, the sheet is cut apart to produce individual cards.
Gang Up Repeat layout
This job can be made even more efficient by eliminating the
gutters between cards, allowing you to reduce significantly the
number of cuts required to separate each card from its neighbour
neighbor. Defining zero-width gutters on a shared cut line in this
manner is called using a common blade for those cuts.
If you need to print business cards for several different clients,
you could perform a Gang Up Repeat printing job for each, but
you might still wind up wasting paper and time if the jobs do not
fit easily into a simple multiple of sheets. A more efficient
approach is to print several jobs on a single sheet, and then print
that sheet as many times as required. The technique of printing
ES3640e MFP EFI Job Management Guide - 192