Rip Area - Oki ES3640eMFP Management Manual

7
7-166 Fiery WebSpooler and Fiery Spooler
Hold queue jobs
the Print queue and Direct connection are disabled), the operator
must assign a destination to all jobs received from users on the
network (Icon 1). Once assigned, jobs move down the Spool
queue for processing (Icons 2, 3, and 4). All jobs printed to the
Hold queue require routing by an operator.
Print queue jobs
network jobs sent to the Print queue appear in the Spool area,
where they are displayed with a white printer icon (Icon 2). When
jobs reach the head of the queue, they are RIPped and printed
without operator intervention.
Direct Connection
displayed in the job lists. They are displayed briefly in the status
bars (where they cannot be selected) and are included in the Job
Log.

RIP area

The job icons in the RIP area are as follows:
RIP area icon
1
2
After a job is rasterized, it goes into the RIP area. The RIP area
holds only jobs with raster data. Jobs in the RIP area are either
waiting for the printer to be free (Print queue jobs, Icon 2), or
they are being held (Icon 1). Held jobs in the RIP area have
ES3640e MFP EFI Job Management Guide - 166
—When printing requires an operator (because
—When printing does not require an operator,
—Jobs printed to the Direct connection are not
What it indicates
Raster data, no
destination defined;
may have been printed
before and held
Raster data headed for
Print in its turn; no
hold defined
How long you see
the job
Until it is deleted,
moved to the Archive
window, or stripped of
its raster data and
sent to the Spool area
Until printer is free to
print the job