Scale Settings - Oki ES3640eMFP Management Manual

6
6-137 Imposition settings
Non-imageable area
Trim marks
Image
sheet.
To specify horizontal and vertical bleed amounts for a job, click
Define in the Layout panel and enter values (from 0 to 72 points,
0 to 1 inch, or 0 to 25.4 mm) in the Define Bleeds dialog box.
The Bleeds option is not available in Mixed Page mode.
When you specify a bleed, you move the trim marks into the
Note:
page by the bleed value on both the top and the bottom of the
page, and on both sides of the page. Therefore, you reduce the
size of your finished page by twice the bleed amount. If you plan
on using bleeds, design your image to be slightly larger than the
size of the final, trimmed page and select a larger paper size to
accommodate trimming.

Scale settings

Use Scale settings to enlarge or shrink the page by a specified
amount.
ES3640e MFP EFI Job Management Guide - 137