Receiving Faxes; Using Fax Mode; Using Tel Mode - Sharp B750 - UX B/W Inkjet Facsimile Operation Manual

3. Receiving Faxes

Using FAX Mode

To select FAX mode, press
FAX appears in the display.
In FAX mode, the machine
automatically answers all calls on 2
rings and receives incoming faxes.
♦
If you pick up the handset before the
machine answers, you can talk to the
other party and receive a fax as
explained in Using TEL Mode below.
To change the number of rings on
which the machine answers calls,
change the "NUMBER OF RINGS"
setting (p. 51).
The machine automatically reduces
received faxes as needed to fit the
paper. If you prefer to have all faxes
printed at full size, change the
"RECEIVE RATIO" setting (pp. 51
and 55).

Using TEL Mode

To select TEL mode, press
TEL appears in the display.
In TEL mode, you must answer all calls
(even faxes) by picking up the
machine's handset or another phone
connected to the same line.
Answering with the machine's
handset
RECEPTION
Important: If a document is loaded in
until
the machine's feeder, remove it before
performing the steps below.
1
2
•
3
•
Answering a call on another
phone connected to the same
line
RECEPTION
until
1
2
Using FAX Mode
When the machine rings, pick up
the handset.
If you hear a fax tone, wait until the
display shows [RECEIVING] and
then replace the handset.
If [RECEIVING] does not appear (or
if you have set the Fax Signal
Receive setting to NO (pp. 51, 53)),
START/
MEMORY
press to begin reception.
If the other party first speaks with
you and then wants to send a fax,
START/
MEMORY
press after speaking (press
START/
MEMORY
before the sender presses
their Start key).
When [RECEIVING] appears in the
display, hang up.
Answer the phone when it rings.
If you hear a soft fax tone, wait until
the machine responds, (the
extension phone will go dead), then
hang up.
23