Making Copies - Sharp B750 - UX B/W Inkjet Facsimile Operation Manual

5. Making Copies

The machine can be used as a
convenience copier. Follow the steps
below to make copies.
Sorting copies
The machine is initially set to not sort
copies. If you wish to have copies
sorted as shown below, change the
"SORT COPY" setting to YES (pp. 51
and 55).
B C
A
Sorted
(SORT COPY)
B C
B C
A
A
Example: Two copies
each of three originals
1
Load the document(s). (Maximum
of 20 A4 sheets.)
•
If desired, press
resolution and/or contrast.
2
Select the following copy settings as
needed:
•
Enlarge/reduce: Press
to select 100%, 125%, 135%,
200%, 70%, 88% or 94%.
Default setting: 100%.
•
Number of copies per original:
Enter a number from 1 to 99.
Default setting: 1
Example: Press
42
Originals
Not sorted
(MULTI COPY)
A
B
C
A
B
C
RESOLUTION
to set the
or
for two copies
3
When you are ready to begin
COPY/HELP
copying, press
If the memory becomes full...
If the memory becomes full during
scanning, [MEMORY FULL] will
appear in the display.
START/
♦
MEMORY
Press to copy the pages
which have been stored up to that
point in memory (the remaining
pages will automatically feed out).
After copying is finished, the
memory will be cleared and you can
copy the remaining pages. You will
also need to copy the page which
was being scanned when the
memory filled up.
♦
To cancel the entire copy job, press
STOP
.
Note: It may not be possible to make a
copy of an original if a high resolution
setting is used and/or the original
contains so much detailed content that
the memory becomes full before
scanning finishes.
When you make copies with the
resolution set to HALF TONE, the
machine is initially set to print at a
slower printing speed to enable higher
quality images. If you prefer faster
printing at the expense of slightly
reduced image quality, change the
"QUALITY MODE" setting to "NO" (pp.
51 and 56).
.