Sharp B750 - UX B/W Inkjet Facsimile Operation Manual page 20

Sending a Fax: Auto Dialling
START/
MEMORY
4
Press .
5
Enter the name of the destination by
pressing number keys for each letter
as shown in the chart on page 6
(max. 16 characters).
•
To clear a mistake, press
START/
MEMORY
6
Press .
•
If you selected a Rapid Key or
Speed Dial number in Step 2, the
display will briefly show [STORED],
and then [NEW NUMBER]. Go to
Step 7.
•
If you did not select a Rapid Key or
Speed Dial number in Step 2, the
display will show the next available
Rapid Key or Speed Dial number. If
that number is acceptable, press
START/
MEMORY
and go to Step 7. If not, press
the desired Rapid Key (or press
SPEED DIAL
and enter the desired 2-digit
Speed Dial number) and go to Step
7.
7
Return to Step 2 to store another
number, or press
•
To confirm that an auto-dial number
has been stored correctly, print out
the Destination List as explained on
page 57.
18
SPEAKER
.
STOP
to exit.
Editing and clearing auto-dial
numbers
To make changes to a previously stored
auto-dial number, or clear a number,
follow the steps below.
Note: A number that is permitted to be
dialled using the Call Restriction
function cannot be edited or deleted.
FUNCTION
1
Press then
2
Press the Rapid Key (or press
SPEED DIAL
and enter the 2-digit Speed
Dial number) of the number that you
want to edit or clear. You can also
press or
number appears and press
Display: [1=EDIT, 2=CLEAR]
3
Press for "EDIT" or
"CLEAR".
•
If you selected "CLEAR", go to Step
7.
4
If you selected "EDIT", make the
desired changes to the number.
•
Press or
cursor to the digit or digits you wish
to change, and then enter the new
digit. The new digit will replace the
old digit.
•
If you do not wish to change the
number, go directly to Step 5.
.
until the
.
for
to move the