Sharp B750 - UX B/W Inkjet Facsimile Operation Manual page 46

Broadcasting
Broadcasting using a Group
Key
If the destinations to which you want to
broadcast have all been stored in one
Group Key (see Storing numbers in
Group Keys which follows), you can
perform the broadcast operation using
the following simplified procedure:
1
Load the document(s).
•
If desired, press
resolution and/or contrast.
2
Press the appropriate Group Key
( or
G1 G2
•
Transmission will begin.
Storing destinations in Group
Keys
Follow the steps below to store a group
of destinations in a Group Key.
♦
Rapid Keys 15/G1 and 16/G2 can be
used as Group Keys. A key cannot be
simultaneously programmed as both a
Group Key and a Rapid Key.
♦
Up to 20 fax destinations can be
stored in one Group Key.
♦
Only Rapid Key and Speed Dial
numbers can be stored in a Group
Key. Full numbers cannot be stored.
FUNCTION
1
Press , then
[ENTRY MODE]
2
Press , then
[GROUP ENTRY]
44
RESOLUTION
to set the
).
until
.
appears
until
appears.
3
Press .
4
Press (SET) to store a group.
(Press (CLEAR) to clear a
group.)
•
If [GROUP SPACE FULL] appears,
both keys have already been
programmed. Clear one of the keys
and then store a group.
5
Press the Group Key that you want
to use ( or
G1
clearing a Group Key, press the
Group key that you want to clear
and go to Step 9.)
•
If [ALREADY STORED] or [RAPID #
STORED] appears, the key has
already been programmed. Clear the
key or try the other Group Key.
6
Select a destination using one of the
following methods:
•
Press a Rapid Key.
•
SPEED DIAL
Press and enter a 2-digit
Speed Dial number.
•
Press or
desired destination appears in the
display.
7
Press to enter the destination.
8
Repeat Steps 6 and 7 for each of
the other desired destinations
(maximum of 20).
). (If you are
G2
until the