Key Lock Function - Sharp B750 - UX B/W Inkjet Facsimile Operation Manual

2
Enter the fax number using one of
the methods below:
•
Press a Rapid Key and then
•
SPEED DIAL
Press , enter a 2-digit Speed
Dial number, and press
•
Enter the full fax number with the
number keys and press
•
Press or
or number of the other party appears
in the display, and press
•
Press once to select the last
number dialled (redial) and press
START/
MEMORY
.
3
Check the name or number that
appears in the display. If it is correct,
START/
MEMORY
press to begin dialling and
transmission.
•
If the name or number is not correct,
STOP
press to clear it.
START/
MEMORY
.
START/
MEMORY
.
START/
MEMORY
.
until the name
START/
MEMORY
.

Key Lock Function

Key Lock Function
The Key Lock function restricts use of
the machine to authorized users. When
the machine is locked with this function,
a valid 4-digit user ID (or the
administrator code) must be entered
each time a user wishes to use the
machine.
♦
When the Key Lock function is
activated, the only actions that are
possible without entering a user ID
are fax reception and receiving voice
calls on the handset. Outgoing voice
calls (including emergency calls) and
fax transmission are not possible.
Activating the Key Lock
function (locking the machine)
To activate the Key Lock function, follow
the steps below.
♦
To activate the Key Lock function, at
least one user ID must be set.
1
Press .
Display: [
KEY LOCK ON]
2
Press then
•
[ ] will appear in the
KEY LOCK
display while the machine is locked.
Unlocking the machine
To use the machine when [
appears in the display, follow the steps
below.
1
Press .
Display: [
ENTER YOUR ID]
START/
MEMORY
.
]
KEY LOCK
29