Caller Id (Requires Service) - Sharp B750 - UX B/W Inkjet Facsimile Operation Manual

•
You can press
and check your entered destinations.
To delete a destination, press
when it appears.
9
When you have finished entering the
destinations, press
STOP
10
Press to exit.
Caller ID
(Requires Service)
Important: To use this function, you
must subscribe to a Caller ID service
from your phone company. The
machine may not be compatible with
some Caller ID services.
If you subscribe to a Caller ID service,
you can have the machine show the
name and number of the caller when
you receive a call.
FUNCTION
1
Press , then
[
OPTION SETTING] appears
2
Press , then
[
CALLER-ID] appears.
3
Press .
4
Press (YES) to turn on Caller
ID. (To turn off Caller ID, press
to scroll through
SPEAKER
START/
MEMORY
.
until
.
until
.)

Caller ID (Requires Service)

STOP
5
Press to exit.
Note: Some caller ID services may not
provide the name of the caller. In this
case, only the phone number will
appear when you receive a call.
Display messages
One of the following messages will
appear while the machine rings if caller
information is not available.
NO No caller information was
received. Make sure that
SERVICE
your service has been
activated.
CALLER-ID Noise on the telephone
line prevented reception of
ERROR
caller information.
OUT OF The call was made from an
area which does not have
AREA
Caller ID service, or the
service is not compatible
with your service.
PRIVATE Caller information was not
provided at the caller's
CALL
request.
45