Remove Paper From Standard Output Bin; Restore Held Jobs; Scan Document Too Long; Unsupported Disk - Lexmark 734de - X Color Laser User Manual

Load manual feeder with <x>
<x> is a paper type or size.
Try one or more of the following:
•
Load the specified paper in the multipurpose feeder.
•
Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot
find a tray with the correct paper type and size, then it prints from the default source.
•
Cancel the current job.
Memory full, cannot print faxes
There is not enough memory to print the fax job.
Touch Continue to clear the message without printing. Held faxes will attempt to print after the printer has been
restarted.

Remove paper from standard output bin

Remove the stack of paper from the standard exit bin.

Restore Held Jobs?

Try one or more of the following:
•
Touch Continue to restore all held jobs stored on the printer hard disk.
•
Touch Do not restore if you do not want any print jobs to be restored.

Scan Document Too Long

The scan job exceeds the maximum number of pages. Touch Cancel Job to clear the message.
SMTP server not set up. Contact system administrator.
An error occurred on the SMTP server, or the SMTP server is not configured properly. Touch Continue to clear the
message. If the message appears again, contact your system support person.

Unsupported disk

An unsupported printer hard disk has been installed. Remove the unsupported device, and then install a supported
one.
31 Missing or defective <color> cartridge
The specified toner cartridge is either missing or not functioning properly. Try one or more of the following:
•
Remove the specified toner cartridge, and then reinstall it.
•
Remove the specified toner cartridge, and then install a new one.
Troubleshooting
259