Fax Receive Settings; Auto Reduction; Output Bin - Lexmark 734de - X Color Laser User Manual

Menu item
Shadow Detail
0–4
Scan edge to edge
On
Off
Sharpness
0–5
Enable Color Fax Scans
On by default
Never use
Always use
Off by default
Auto Convert Color Faxes to
Mono Faxes
On
Off

Fax Receive Settings

Menu item
Enable Fax Receive
On
Off
Rings to Answer
1–25

Auto Reduction

On
Off
Paper Source
Auto
Tray <x>
Multi-Purpose Feeder

Output Bin

Standard Bin
Bin 1<x>
Sides (Duplex)
On
Off
Fax Footer
On
Off
Description
Adjusts the amount of shadow detail visible on a fax
Note: 0 is the factory default setting.
Specifies if the original document is scanned edge-to-edge prior to faxing
Note: Off is the factory default setting.
Adjusts the sharpness of a fax
Note: 3 is the factory default setting.
Enables color faxing
Note: "Off by default" is the factory default setting.
Converts all outgoing faxes to black and white
Note: On is the factory default setting.
Description
Allows fax jobs to be received by the printer
Note: On is the factory default setting.
Specifies the number of rings before answering an incoming fax job
Note: 1 is the factory default setting.
Scales an incoming fax job so it fits the size of the paper loaded in the designated
fax source
Note: On is the factory default setting.
Specifies the paper source selected to supply paper for the printer to print an
incoming fax
Specifies an output bin for received faxes
Note: Bin 1 is available only when the finisher is installed.
Enables duplex printing (two-sided printing) for incoming fax jobs
Prints the transmission information at the bottom of each page from a received fax
Note: On is the factory default setting.
Understanding printer menus
196