Replacing Supplies - Lexmark 734de - X Color Laser User Manual

Replacing Supplies

Replacing a photoconductor
There are three different display messages that may appear when a photoconductor replacement is necessary: 84
Replace <color> photoconductor, 84 <color> photoconductor nearly low, or 84 <color>
photoconductor low.
1
Open the upper front door, and then open the lower front door.
Warning—Potential Damage: To avoid overexposing the photoconductors, do not leave the front doors open
for more than 10 minutes.
2
Pull the specified photoconductor up, and then slide it to the right to remove it from the printer.
1
Maintaining the printer
239
2