Lexmark 734de - X Color Laser User Manual page 70

Transparencies*
* Avoid touching the print side of transparencies. Be careful not to scratch them.
4
Load the paper or specialty media. Slide the stack into the multipurpose feeder until it comes to a stop.
Notes:
•
Do not exceed the maximum stack height by forcing paper under the stack height limiter.
•
Load only one size and type of media at a time.
•
Media should lie flat and fit loosely in the multipurpose tray.
•
If the media is pushed too far into the multipurpose feeder, then press the paper release lever to remove it.
•
Load envelopes with the flap side up and the return address edge entering the printer first.
Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or
self-stick adhesives. These envelopes may severely damage the printer.
5
From the printer control panel, set the Paper Size and Paper Type.
a
Make sure the printer is on and Ready appears.
b
On the home screen, touch
c
Touch Paper Menu.
d
Touch Paper Size/Type.
e
Touch the arrows for the desired tray until the correct size or type setting appears.
f
Touch Submit.
g
Touch to return to the home screen.
.
Loading paper and specialty media
70