Remove Paper From Standard Output Bin - Lexmark MS810 User Manual

Troubleshooting
Remove paper from [linked set bin name]
Remove paper from the specified bin. The printer automatically detects paper removal and resumes printing.
If removing the paper does not clear the message, then select Continue on the printer control panel. For
non-touch-screen printer models, press

Remove paper from standard output bin

Remove the paper stack from the standard bin. The printer automatically detects paper removal and
resumes printing.
If removing the paper does not clear the message, then select Continue on the printer control panel. For
non-touch-screen printer models, press
Replace cartridge, printer region mismatch [42.xy]
Install a toner cartridge that matches the region number of the printer. x indicates the value of the printer
region. y indicates the value of the cartridge region. x and y can have the following values:
List of printer and toner cartridge regions
Region number
0
1
2
3
4
5
9
Notes:
•
The x and y values are the .xy of the error code shown on the printer control panel.
•
The x and y values must match for printing to continue.
Replace defective imaging unit [31.xy]
Replace the defective imaging unit to clear the message. For more information, see the instruction sheet
that came with the supply or see the "Replacing supplies" section of the User's Guide.
Note: If you do not have a replacement imaging unit, then see the "Ordering supplies" section of the
User's Guide or visit www.lexmark.com.
to confirm.
to confirm.
Region
Global
United States, Canada
European Economic Area (EEA), Switzerland
Asia Pacific, Australia, New Zealand
Latin America
Africa, Middle East, rest of Europe
Invalid
295