4
Click Analog Fax Setup.
5
Click inside the Station Name box, and then enter the name to be printed on all outgoing faxes.
6
Click inside the Station Number box, and then enter the printer fax number.
7
Click Submit.
Choosing a fax connection
You can connect the printer with equipment such as a telephone, an answering machine, or a computer modem. To
determine the best way to set up the printer, see the following table.
Notes:
•
The printer is an analog device that works best when directly connected to the wall outlet. Other devices (such
as a telephone or answering machine) can be successfully attached to pass through the printer, as described in
the setup steps.
•
If you want a digital connection such as ISDN, DSL, or ADSL, a third-party device (such as a DSL filter) is required.
Contact your DSL provider for a DSL filter. The DSL filter removes the digital signal on the telephone line that
can interfere with the ability of the printer to fax properly.
•
You do not need to attach the printer to a computer, but you do need to connect it to an analog telephone line
to send and receive faxes.
Equipment and service options
Connect directly to the telephone line
Connect to a Digital Subscriber Line (DSL or ADSL) service
Connect to a Private Branch eXchange (PBX) or Integrated
Services Digital Network (ISDN) system
Use a Distinctive Ring service
Connect to a telephone line, telephone, and answering
machine
Connect through an adapter used in your area
Connect to a computer with a modem
Fax connection setup
See "Connecting to an analog telephone line" on
page 115
See "Connecting to a DSL service" on page 115.
See "Connecting to a PBX or ISDN system" on page 116.
See "Connecting to a distinctive ring service" on page 116.
See "Connecting the printer and a telephone or answering
machine to the same telephone line" on page 117
See "Connecting to an adapter for your country or region"
on page 119.
See "Connecting to a computer with a modem" on
page 124.
Faxing
114
Need help?
Do you have a question about the 734de - X Color Laser and is the answer not in the manual?