Cartridge Part Number Unsupported By Device; Short Paper; Insufficient Memory To Support Resource Save Feature; Insufficient Memory To Collate Job - Lexmark 734de - X Color Laser User Manual

32 Cartridge part number unsupported by device

Remove the unsupported toner cartridge, and then install a supported one.

34 Short paper

Try one or more of the following:
•
Load the appropriate paper or other specialty media in the proper tray.
•
Touch Continue to clear the message and print the job using a different paper tray.
•
Check tray length and width guides and make sure the paper is properly loaded in the tray.
•
Check the Print Properties or Print dialog settings to make sure the print job is requesting the correct paper size
and type.
•
Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the
paper is large enough for the data being printed.
•
Cancel the current print job.

35 Insufficient memory to support Resource Save feature

Try one or more of the following:
•
Touch Continue to disable Resource Save and continue printing.
•
To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, and then exit
the menus to activate the link buffer changes. When Ready appears, enable Resource Save.
•
Install additional memory.

37 Insufficient memory to collate job

Try one or more of the following:
•
Touch Continue to print the portion of the job already stored and begin collating the rest of the print job.
•
Cancel the current print job.
37 Insufficient memory, some Held Jobs were deleted
The printer deleted some held jobs in order to process current jobs.
Touch Continue to clear the message.

38 Memory full

Try one or more of the following:
•
Touch Continue to clear the message.
•
Cancel the current print job.
•
Install additional printer memory.
Troubleshooting
260