Oki CX2731MFP Advance User Manual page 254

Code Message
Inspection is
required
%ERRCODE%:
SIP Error
Please call
service
Scanner unit
failed to detect
printer unit
SIP Firmware
Missing
Please see Help
for details
Wait a Moment
Network
Configuration
Writing
MC361/MC561/CX2731 MFP Advanced User's Guide
<STATUS>
key
Blinks
Blinks
Blinks
Lights up
254
– Issues: Error Messages
Cause/Remedy
Processing of scanned image
has failed.
Turn the MFP off and then on
again.
If the error is not resolved,
call your local service dealer.
An error occurred between
the scanner and printer units.
Turn the MFP off and then on
again.
If the error is not resolved,
call your local service dealer.
A board failure has been
detected.
Turn the MFP off and then on
again.
If the error is not resolved,
call your local service dealer.
Changed network settings are
being stored.