Oki CX2731MFP Advance User Manual page 96

For all Printer Drivers
1 Load envelopes on the MP tray, then press the set button
inwards.
2 Open the Rear exit tray of the MFP.
3 Press the <SETTING> key on the control panel.
4 Press the down arrow key to select [Paper Setup], then press
<OK>.
5 Press the down arrow key to select [MP tray], then press <OK>.
6 Make sure [Paper Size] is selected, then press <OK>.
7 Press the down arrow key to select a type of envelope, then
press <OK>.
8 Use the left arrow key to go back to the main screen.
9 On the computer, open the file you want to print.
10 Configure the paper size, paper source and orientation on the
printer driver as follows.
Windows PCL/PCL XPS Printer Driver
1 Follow the steps under 'For all Printer Drivers" above.
2 From the "File" menu, select "Print".
3 Click "Preferences" (or "Properties", depending on the version of
Windows you are using).
4 On the "Setup" tab, select a type of envelope from "Size".
5 Select "Multi Purpose Tray" from "Source".
6 Select the "Job Options" tab.
7 Select the orientation under "Orientation".
8 Configure other settings if necessary, then start printing.
Windows PS Printer Driver
1 Follow the steps under 'For all Printer Drivers" above.
2 From the "File" menu, select "Print".
MC361/MC561/CX2731 MFP Advanced User's Guide
96
– Printing: Envelopes