Oki CX2731MFP Advance User Manual page 81

4 Start Adobe Photoshop CS3 on your Mac.
5 Select "Import" under "File" and then select "OKI MC361_561
Twain" or "OKI MC361_561 Twain Network".
- If you select "OKI MC361_561 Twain" skip to step 9.
- The first time you select "OKI MC361_561 Twain
Network", perform steps 6 through 8.
- If you are selecting "OKI MC361_561 Twain Network"
for the second time, skip to step 9.
6
For the first network scan, the dialog box indicating that
the tool for selecting a connection destination is started
displays. Click "OK".
7
On the "Scan Settings" dialog box, select a connection
destination to register host information if necessary, and
then click "OK".
8
Select "Import" from "File" of Adobe Photoshop CS3 and
select "OKI MC361_561 Twain Network".
The window appears.
9
Click "scan".
Scanning starts.
10 Select [Quit Photoshop] from [Photoshop].
Changing Settings (for Macintosh)
Simple Mode
You can change the settings of five registered buttons.
1 Follow the procedure for "Starting a Scan Job (for Macintosh)"
through step 8.
2 Select "Simple" under "Mode".
3 Click "Settings".
4 Click "scan" to change the settings.
5 Click "OK".
6
If you start a scan job, click "scan".
If you want to finish the setting, click "Quit".
MC361/MC561/CX2731 MFP Advanced User's Guide
81
– Scanning: Drivers and Software