Oki CX2731MFP Advance User Manual page 300

Symptom
The MFP does not
start printing.
The display screen
is blank.
MC361/MC561/CX2731 MFP Advanced User's Guide
Cause
An error is displayed
on the panel.
The Ethernet or USB
cable is unplugged.
Something is wrong
with the Ethernet or
USB cable.
The MFP does not
support your Ethernet
or USB cable.
Something may be
wrong with the
printing function.
The interface is
disabled.
The printer driver of
the MFP is not
selected.
The specified port of
the printer driver is
wrong.
The MFP is in the sleep
mode.
300
– Issues: MFP Issues
Remedy
Check the error code and
follow the on-screen
instructions.
Plug in the Ethernet or
USB cable firmly.
Use another Ethernet or
USB cable.
• Use a USB 2.0
compatible cable.
• Use an Ethernet
10BASE-T/100BASE-
TX compatible cable.
Press the <SETTING> key
and select [Reports] >
[Configuration] and print
out the configuration list
to check the printing
performance.
Press the <SETTING> key
and select [Admin Setup]
> [Network Menu] >
[Network Setup] and
enable the interface you
are using.
Set the printer driver of
the MFP as the default
printer.
Specify the port the
Ethernet or USB cable is
connected to.
Check if the <POWER
SAVE> key lights up and
press the <POWER SAVE>
key to activate the MFP.