Bassociate; Battman; Block Attribute Manager - Autodesk AUTOCAD 2006 Command Reference Manual

The base point is expressed as coordinates in the current UCS. When you
insert or externally reference the current drawing into other drawings, this
base point is used as the insertion base point.

BASSOCIATE

Associates an action with a parameter in a dynamic block definition
Command line:
Associates an orphaned action with a parameter. You can only use the
BASSOCIATE command in the "Block Editor" on page 139. An action becomes
orphaned when the parameter with which it is associated is removed from
the block definition.
Select action object: Select an action in the current block definition that is not
associated with a parameter
Select parameter to associate with action: Select a parameter to associate with the
action (if you selected a lookup action, you can select one or more lookup parameters)
If you selected an action and parameter combination that requires that the
action be associated with a key point on the parameter, prompts are displayed
to select the parameter point to associate with the action.

BATTMAN

Edits attribute properties of a block definition
Modify II toolbar:
Modify menu: Object
Command line: battman
The Block Attribute Manager is displayed.
If the current drawing does not contain any blocks with attributes, a message
is displayed.

Block Attribute Manager

Modify menu: Object
Command line: battman
128 | Chapter 4
bedit bassociate
Attribute Block Attribute Manager
Attribute Block Attribute Manager