Hinge Assembly - Toshiba A100 VA3 - Satellite - Pentium Dual Core 1.6 GHz Maintenance Manual

4.24 Hinge assembly

4.24 Hinge assembly
Removing the hinge assembly
To remove the hinge assembly, perform the following procedure. (See Figure 4-42, 4-43)
1. Remove the following screws fixing the hinge assembly on the LCD cover side.
M2.5 4B FLAT BIND
Figure 4-42 Removing the hinge assembly (LCD cover side)
2. Remove the following screws fixing hinge assembly on the base side.
Caution: Silicon grease is applied to screws on the base side. Drive the screws a little
strongly.
PORTEGE A100 Maintenance Manual (960-460)
M2.5 4B FLAT BIND screw
M2.5 4B FLAT BIND screw
Hinge
M2.5 4B FLAT BIND screw
M2.5 4B FLAT BIND screw
4 Replacement Procedures
x2 (left)
x2 (right)
Hinge
LCD cover
x3 (left)
x3 (right)
4-53