Toshiba A100 VA3 - Satellite - Pentium Dual Core 1.6 GHz Maintenance Manual page 178

3.26 SETUP
(g) Power Button Lamp
This option specifies a lamp pattern of power button.
Status
Mode
1(default)
Mode 2
Mode 3
Off
When the AC adapter and battery pack are removed, once the setting returns to
Mode1 (default). After turning on the power of the computer again, the setting
returns to the one before the AC adapter and battery pack are removed.
(h) Panel Power On/Off
This option is displayed in the resume mode.
Enabled
Disabled
8. Configuration
This option lets you set the device configuration.
Setup by OS
All Devices
Note: When using installed OS, selecting "Set by OS" is recommended. But, when setting
"PC CARD-Controller Mode" to other than " Auto-Selected", select " All
Devices".
9. DRIVES I/O
This option set the HDD, CD-ROM and PC card.
(a) Build-in HDD
PORTEGE A100 Maintenance Manual (960-460)
Table 3-7 Lamp pattern of power button
Power ON
Lights blue. Lights yellow.
Lights blue. Lights green and
orange
alternately.
Blinks in order of Lights yellow.
green, orange and
blue
Does not light.
Enables the Panel Power On/Off.
Disables the Panel Power On/Off. (Default)
Operating system sets devices that it can control. (Default)
BIOS sets all devices.
Standby Power off/halt
Lights orange.
Lights green and blue
alternately.
Lights orange.
3 Test and Diagnostics
3-77