Hinge Assembly - Toshiba PORTEGE A200 series Maintenance Manual

4 Replacement Procedures

4.25 Hinge assembly

Removing the hinge assembly
To remove the hinge assembly, perform the following procedure. (See Figure 4-48 and 4-49)
1. Remove the following screws fixing the hinge assemblies on the LCD cover side.
?
?
Hinge assembly
Figure 4-48 Removing the hinge assembly (LCD cover side)
2. Remove the following screws fixing the hinge assemblies on the base side.
?
Caution: Silicon grease is applied to screws on the base side. Drive the screws a little
strongly.
4-58
M2.5? 6 Tapping screw
M2.5? 4B FLAT HEAD
M2.5?6 Tapping
M2.5?4B FLAT HEAD
M2.5? 4B FLAT HEAD
? 2 (left? 1, right? 1)
? 2 (left? 1, right? 1)
Hinge assembly
? 4
PORTEGE A200 Maintenance Manual (960-499)
4.25 Hinge assembly
M2.5?4B FLAT HEAD