4 Replacement Procedures
4.22 LCD unit / FL inverter
4.22 LCD unit / FL inverter
Removing the LCD unit / FL inverter
To remove the LCD unit and FL inverter, perform the following procedure. (See Figure 4-33
to 4-37.)
1. Peel off the mask seals and remove the following screws.
M2 4Z
BIND screw
x2
M2 4Z BIND
Mask seal
Mask seal
Figure 4-33 Removing the screws and mask seals
4-44
PORTEGE A100 Maintenance Manual (960-460)