4 Replacement Procedures
3. Take both the hinges out of the holes.
M2.5 4B FLAT BIND
Hinge
Figure 4-43 Removing the hinge assembly (base side)
Installing a hinge assembly
To install a hinge assembly, perform the following procedure. (See Figure 4-42, 4-43.)
1. Fix the hinges to the LCD cover with the following screws.
2. Fix the hinges to the base with the following screws.
Caution: When fixing the hinge assembly, use new screws and apply Locktight to them.
4-54
M2.5 4B
FLAT BIND screw
M2.5 4B
FLAT BIND screw
M2.5 4B
FLAT BIND screw
M2.5 4B
FLAT BIND screw
4.24 Hinge assembly
Hinge
x2 (left)
x2 (right)
x3 (left)
x3 (right)
PORTEGE A100 Maintenance Manual (960-460)