Toshiba A100 VA3 - Satellite - Pentium Dual Core 1.6 GHz Maintenance Manual page 255

4 Replacement Procedures
6. Sticking tape and insulating sheet
<Procedure>
1) Stick the X-PCB insulating sheet. •
2) Stick the lower side (lamp side) of bezel tape.‚
3) Stick the FL cable tape.ƒ„
Caution: 1. When sticking the insulating sheet, do no bend it.
2. When sticking tape and insulating sheet, do not damage the leading part of
lamp cable and let not it out of the display part.
Sticking X-PCB insulating
sheet
Standard for sticking bezel tape:
Stick it between scribed lines.
Standard for sticking FL cable tape:
Stick it making the outline of bezel a
guide
Figure 4-55 Replacing TDM fluorescent lamp(12)
4-68
Standard for sticking FL cable tape:
Stick it making the second scribed line
from the center of display as a guide
PORTEGE A100 Maintenance Manual (960-460)
4.25 Fluorescent lamp