Toshiba A100 VA3 - Satellite - Pentium Dual Core 1.6 GHz Maintenance Manual page 256

4.25 Fluorescent lamp
4.25.2 Replacing the 12.1 inch LG Phillips fluorescent lamp
The following describes the procedure for replacing the fluorescent lamp. (See Figure 4-56 to
4-63.)
1. Disassembly of outside tape/ Cover shield
<Procedure>
1) Disassembly of Tape adhesive used for B/L Wire fixing
Caution: Pressure or stress should not be given on B/L Wire.
2) Disassembly of Cover shield(S)
Caution: 1. Pressure or stress should not be given on Gate TCP.
2. Usage of gloves with anti-electric discharge coating is recommended
to eliminate possible damage on circuits occurred by ESC.
3) Disassembly of Cover shield(S)
Caution: Pressure or stress should not be given on Source PCB.
4) Disassembly of Tapes used for Top case fixing
Caution: Pressure or stress should not be given on Top case during this process.
Figure 4-56 Replacing LG Phillip fluorescent lamp (1)
PORTEGE A100 Maintenance Manual (960-460)
4 Replacement Procedures
4-69