Accessing The Setup Program - Toshiba A100 VA3 - Satellite - Pentium Dual Core 1.6 GHz Maintenance Manual

3.26 SETUP

3.26.2 Accessing the SETUP Program

Selecting 0-SETUP from the DIAGNOSTICS MENU and pressing Enter displays the followings:
MEMORY
Total
SYSTEM DATE/TIME
Date(MM-DD-YY)
Time(HH:MM:SS)
BATTERY
Battery Save Mode = Full Power
PASSWORD
Not Registered
: Select items
Esc: Exit without saving
CONFIGURATION
Device Config. = Setup by OS
DRIVES I/O
Built-in HDD
= Primary IDE(1F0H/IRQ14)
CD-ROM = Secondary IDE(170H/IRQ)
PCI BUS
PCI BUS
: Select items Space, BkSp: Change values
Esc: Exit without saving
PORTEGE A100 Maintenance Manual (960-460)
SYSTEM SETUP (1/2)
= XXXXX KB
= XX-XX-XXXX
= XX:XX:XX
Space, BkSp: Change values
Home : Set default values
SYSTEM SETUP (2/2)
= IRQ10,IRQ11
Home: Set default values
ACPI BIOS version = X.XX
BOOT PRIORITY
Boot Priority =HDD FDD CD-ROM LAN
HDD Priority = Built-in HDD PC Card
Network Boot Protocol = PXE
DISPLAY
Power On Display
LCD Display Stretch
TV Type
Others
Power-up mode
CPU Cache
Level 2 Cache
Dynamic CPU Frequency Mode
= Dynamically Switchable
Auto Power On
Sound Logo
Power Button Lamp
PgDn, PgUp: Change pages
End: Save changes and Exit
ACPI BIOS version = X.XX
PC CARD
Controller Mode = Auto-Selected
PERIPHERAL
Internal Pointing Device
Hard Disk Mode = Enhanced IDE(Normal)
LEGACY EMULATION
USB KB/Mouse Legacy Emulation
USB-FDD Legacy Emulation
PCI LAN
Built-in LAN = Enabled
PgDn, PgUp: Change pages
End: Save changes and Exit
3 Test and Diagnostics
= Auto-Selected
= Enabled
= NTSC(Japan)
= Boot
= Enabled
= Enabled
= Disabled
= Enabled
= Mode 1
= Enabled
= Enabled
Enabled
=
3-67