4 Replacement Procedures
4.30 Hinge assembly
Removing the Hinge assembly
The following describes the procedure for removing the hinge assembly. (See Figure 4-51
and 4-52.)
1. Remove the following screw and Harness holder.
2. Remove the following screws and LCD harness earth spring.
3. Remove the following screw, antenna cover S and antenna cover T from the slot.
Antenna cover S
4-78
Get user manuals:
See SafeManuals.com
• M2.5×6.0B
FLAT HEAD screw
• M2.5×6.0B
FLAT HEAD screw
• M2.0×6.0S
S-THIN HEAD screw
M2.0×6.0S
S-THIN HEAD
Antenna cover T
Figure 4-51 Removing the hinge assembly (1)
[CONFIDENTIAL]
M2.5×6.0B
FLAT HEAD
M2.5×6.0B
FLAT HEAD
PORTEGE M400 Maintenance Manual (960-541)
4.30 Hinge assembly
×1
×1
×1
Harness holder
M2.5×6.0B
FLAT HEAD
LCD harness
earth spring
Hinge
assembly