Hdd - Toshiba A100 VA3 - Satellite - Pentium Dual Core 1.6 GHz Maintenance Manual

4.10 HDD

4.10 HDD
Removing the HDD
The following describes the procedure for removing the HDD. (See Figure 4-14, 4-15.)
Caution: Take care not to press on the top or bottom of the HDD. Pressure may cause
data loss or damage to the device.
1. Remove the following screw fixing the HDD slot cover and remove the cover.
2. Hold the HDD tab and pull out the HDD assembly.
Tab
3. Remove the following screws fixing the HDD bracket.
PORTEGE A100 Maintenance Manual (960-460)
M2.5 12B FLAT BIND screw
Figure 4-14 Removing the HDD assembly
M3 4S FLAT BIND screw
4 Replacement Procedures
x1
M2.5 12B FLAT BIND
HDD assembly
HDD cover
x4
4-23