4.13 RTC battery
4.13 RTC battery
Removing the RTC battery
To remove the RTC battery, perform the following procedure. (See Figure 4-18.)
1. Remove the RTC battery cable from the connector
2. Turn up the insulator and remove the RTC battery.
Insulator
Installing a RTC battery
To remove a RTC battery, perform the following procedure. (See Figure 4-18.)
1. Connect the RTC battery cable to the connector PJ8760 on the system board.
2. Turn up the insulator and set the RTC battery in the slot.
PORTEGE A100 Maintenance Manual (960-460)
PJ8760
Figure 4-18 Removing the RTC battery
4 Replacement Procedures
PJ8760
on the system board.
RTC battery
Insulator
4-27